Downloads & manuals
Need help with your product?
Our Help & Support area contains articles and videos to help you get the most from your product.
"https://int.simrad-yachting.com/assets/img/default-product-img.png?w=400&h=225&scale=both&mode=max"
NAC-3 Autopilot Computer
SKU: 000-13250-001
000-13250-001
The NAC-3 is the centre of your autopilot system, containing the electronics needed to operate and interface with other key components. The NAC-3 has been designed for boats ten metres (35 feet) or greater in length and is rated to operate high-current pumps, mechanical drive units, and solenoid valves.
Product details
High-Current Output
The NAC-3 Autopilot Computer is recommended for boats above 10 metres (35 feet) in length. It is rated to operate high-current drive pumps including the Simrad RPU160 and RPU300, mechanical drives such as the Simrad DD15, hydraulic linear drives such as the HLD2000 series, and solenoid valves.
Virtual Rudder Feedback
Simrad Virtual Rudder Feedback (VRF) technology eliminates the need to install a separate rudder feedback unit aboard outboard and sterndrive (inboard/outboard) boats with planing hulls. This reduces overall autopilot system cost and complexity, and is ideal where a feedback unit is impractical due to mechanical constraints. For vessels that do require a physical rudder feedback sensor, the NAC-3 supports SimNet or NMEA 2000® connected Simrad RF25 feedback units, and rudder feedback sensors with variable frequency output including the Simrad RF300.
Easy Installation
Industry-standard NMEA 2000® networking and NMEA 0183® input allow simple connectivity to heading sensors, rudder feedback units, autopilot controllers, and multifunction displays located anywhere on board.
Key Features
- Reliable autopilot performance based on Continuum Steering technology
- Recommended for boats above 10 metres (35 feet) in length
- Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves
- Virtual rudder feedback for simplified installation aboard outboard and sterndrive boats
- Supports Simrad RF25 and RF300 rudder feedback units
- NMEA 2000® connectivity to heading sensors, rudder feedbacks, dedicated autopilot controllers, and multifunction displays
- NMEA 0183® input
NMEA 2000
Autopilot
Related Items
-
N2K-T-RD Network T-Connector
-
N2KEXT-2RD 2ft Network Extension Cable
Specifications
- Physical
- Compass Safe
- 0,5m (20 inches)
- Dimensions W x H x D
- 204 x 190 x 57mm (8,1 x 7,5 x 2,2")
- Mounting Type
- Bulkhead
- Weight
- 0,7 kg (1,6 lbs)
- Electrical
- Power Consumption max
- 750W
- Power Consumption typical
- 100mA + Drive load
- Recommended Fuse Rating
- Internal fuse 30A (Slow)
- Supply Voltage
- 12/24VDC +30 -10%
- Environment
- Operating Temperature Range
- -15 to +55C (5 to 131F)
- Storage Temperature Range
- -30C to +70C (-22F to +158F)
- Waterproofrating
- IPx2
- Connectivity
- NMEA 0183 Sentences supported
- Input: AAM, ACK, APB, BOD, BWC, DPT, GGA, GLL, HDG, HDT, HSC, RMA, RMB, RMC, ROT, THS, TNT, VBW, VHW, VLW, VTG, ZDA. Output: HDG (10Hz) or HDT (10Hz), RSA (5Hz)
- NMEA 2000 Connectivity
- 1x CAN terminal, 1 LEN
- Autopilot
- Compasssensor support
- NMEA2000, NMEA0183
- Drive output
- 12/24VDC. Rev. motor control 30A, 50A peak (1 sec.). Solenoid control: 10A (min. 10mA)
- Engine Drive systems integration
- Reversible pump/motor, Solenoid valve on/off
- Rudder sensor s upport
- RF300, RF45X, RF25N, RF70 & VRF
- Other
- Warranty Period
- 2 years
